cfx Namespace

JSON-RPC Spec

There is a JSON-RPC API spec of cfx namespace on GitHub. You can view it in open-rpc playground. Check Conflux-Rust RPC changelog for changes history.

CONVENTIONS

HEX value encoding

Two key data types get passed over JSON: unformatted byte arrays and quantities. Both are passed with a hex encoding but with different requirements for formatting.

Quantities

When encoding QUANTITIES (integers, numbers): encode as hex using the most compact representation and prefix with "0x". Zero should be represented as "0x0". Examples:

• 0x41 (65 in decimal)
• 0x400 (1024 in decimal)
• WRONG: 0x (should always have at least one digit - zero is "0x0")
• WRONG: 0x0400 (no leading zeroes allowed)
• WRONG: ff (missing 0x prefix)

Unformatted data

When encoding UNFORMATTED DATA (byte arrays, hashes, bytecode arrays): encode as hex using two hex digits per byte and prefix with "0x". Examples:

• 0x41 (size 1, "A")
• 0x004200 (size 3, "\0B\0")
• 0x (size 0, "")
• WRONG: 0xf0f0f (must be even number of digits)
• WRONG: 004200 (missing 0x prefix)

Note that block and transaction hashes are represented using 32 bytes.

Base32 Address

BASE32: Base32 addresses should be encoded as an ASCII string of 42-characters plus network prefix, separators, and optional fields. Please note the following constraints for base32 addresses as RPC parameters:

• The network-prefix should match the node's network, i.e. cfx:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp can be sent to mainnet nodes and cfxtest:acc7uawf5ubtnmezvhu9dhc6sghea0403ywjz6wtpg can be sent to testnet nodes. Note that these two example addresses correspond to the same account on different networks.
• Including and omitting the address-type are both accepted, i.e. cfx:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg and cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg are equivalent. However, addresses with an incorrect type, e.g. cfx:type.contract:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg, are rejected.
• Both lowercase (cfx:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg) and uppercase (CFX:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG) addresses are accepted. Mixed-case addresses are rejected.

Refer to Addresses for more knowledge about Base32 addresses.

The default epochNumber parameter

Several RPC methods have an epoch number parameter. The concept of epochs in Conflux is somewhat analogous to the concept of block numbers (height) in other ledgers, but one epoch might contain multiple blocks.

The epoch number specifies a point in time and the corresponding state of the system, subject to consensus. The following options are possible for the epoch number parameter:

• HEX String - an integer epoch number. For example, 0x3e8 is epoch 1000.
• String "earliest" for the epoch of the genesis block.
• String "latest_checkpoint" for the earliest epoch stored in memory.
• String "latest_finalized" - for the latest finalized (by PoS) epoch. (Added from conflux-rust v2.0.0)
• String "latest_confirmed" - for the latest confirmed epoch (using the confirmation meter's estimate).
• String "latest_state" - for the latest epoch that has been executed.
• String "latest_mined" - for the latest known epoch.

Please note that due to performance optimization, the latest mined epochs are not executed, so there is no state available for these epochs. For most RPCs related to state query, "latest_state" is recommended. (Refer to transaction lifecycle for more information about transaction life cycle in Conflux).

EIP-1898 style Conflux epochNumber parameter

Conflux core space supports epoch number parameter in EIP-1898 style for certain RPCs. Developers can query the state of the epoch by providing the epoch number or the block hash. Moreover, this parameter enables the developers to query the state of a specific epoch making sure who is the pivot block, which is useful when dealing with chain reorganizations.

The EIP-1898 style epoch number parameter is an object with 3 optional fields:

• epochNumber. Corresponding to EIP-1898 defined blockNumber
• blockHash. The hash of the block specified.
• requirePivot. Corresponding to EIP-1898 requireCanonical, but has different usage.
  • If true, if the block specified by blockHash is not the pivot block, the RPC will return an error with message "pivot chain assumption failed".
  • If false, the RPC will return the result considering the epoch of the block specified by blockHash, regardless of whether it is the pivot block or not.
  • Defaults to true.

note

If blockHash is provided with requirePivot set to true, the RPC will first check whether the block is the pivot block first regardless of the rpc behaviour, for example, whether the epoch is executed or not.

For example:

{
  "epochNumber": "0x3e8"
}

or
{
  "blockHash": "0x692373025c7315fa18b2d02139d08e987cd7016025920f59ada4969c24e44e06",
  "requirePivot": false
}

or 

{
  "blockHash": "0x692373025c7315fa18b2d02139d08e987cd7016025920f59ada4969c24e44e06",
  "requirePivot": true
}

The EIP-1898 style epoch number parameter is now usable in following RPCs:

• cfx_getBalance
• cfx_getStorageAt
• cfx_call
• cfx_getNextNonce
• cfx_getCode
• cfx_getEpochReceipts

CURL EXAMPLES

Examples of using the JSON_RPC API by making curl requests to an Conflux node are provided below. Each example includes a description of the specific endpoint, its parameters, return type, and a worked example of how it should be used.

The curl requests might return an error message relating to the content type. This is because the --data option sets the content type to application/x-www-form-urlencoded. If your node does complain about this, manually set the header by placing -H "Content-Type: application/json" at the start of the call. The examples also do not include the URL/IP & port combination which must be the last argument given to curl (e.g. 127.0.0.1:12537). A complete curl request including these additional data takes the following form:

$ curl -H "Content-Type: application/json" -X POST --data '{"jsonrpc":"2.0","method":"cfx_clientVersion","params":[],"id":67}' 127.0.0.1:12537

The examples in the rest of this document will use the HTTP endpoint.

State and transaction availability

Conflux archive and full nodes remove historical state tries to reduce storage use. Full nodes will also discard transactions and receipts for historical blocks. As a result, some RPC interfaces might be unavailable for historical queries.

Below is a list of the Conflux RPC APIs and their availability on archive and full nodes. "recent" means that the RPC is only supported for recent items, "OK" means that it should work for any valid input.

RPC	archive node	full node
cfx_call	recent	recent
cfx_checkBalanceAgainstTransaction	recent	recent
cfx_clientVersion	OK	OK
cfx_epochNumber	OK	OK
cfx_estimateGasAndCollateral	recent	recent
cfx_gasPrice	OK	OK
cfx_getAccount	recent	recent
cfx_getAccumulateInterestRate	OK	OK
cfx_getAdmin	recent	recent
cfx_getBalance	recent	recent
cfx_getBestBlockHash	OK	OK
cfx_getBlockByEpochNumber	OK	recent
cfx_getBlockByHash	OK	recent
cfx_getBlockByHashWithPivotAssumption	OK	recent
cfx_getBlockRewardInfo	OK	recent
cfx_getBlocksByEpoch	OK	OK
cfx_getCode	recent	recent
cfx_getCollateralForStorage	recent	recent
cfx_getConfirmationRiskByHash	OK	recent
cfx_getDepositList	recent	recent
cfx_getInterestRate	recent	recent
cfx_getLogs	OK	recent
cfx_getNextNonce	recent	recent
cfx_getSkippedBlocksByEpoch	OK	OK
cfx_getSponsorInfo	recent	recent
cfx_getStakingBalance	recent	recent
cfx_getStatus	OK	OK
cfx_getStorageAt	recent	recent
cfx_getStorageRoot	recent	recent
cfx_getTransactionByHash	OK	recent
cfx_getTransactionReceipt	OK	recent
cfx_getVoteList	recent	recent
cfx_sendRawTransaction	OK	OK

If you query a state entry that is unavailable on the node, you will get an error response:

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBalance","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "earliest"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "error": {
    "code": -32016,
    "message": "Error processing request: State for epoch (number=0 hash=0x24dcc768132dc7f651d7cb35c52e7bba632eda073d8743f81cfe905ff7e4157a) does not exist: out-of-bound StateAvailabilityBoundary { synced_state_height: 0, lower_bound: 9510001, upper_bound: 9569393, optimistic_executed_height: Some(9569392) }"
  },
  "id": 1
}

In this example, we are told that the earliest available state is at epoch 9510001 (0x911c71).

Migrating from Ethereum JSON-RPC

There is a correspondence between some JSON-RPCs from Ethereum and Conflux. Even though the details of JSON-RPC may differ, the following mapping table could be helpful when migrating from Ethereum to Conflux:

Ethereum	Conflux
eth_blockNumber	cfx_epochNumber
eth_call	cfx_call
eth_estimateGas	cfx_estimateGasAndCollateral
eth_gasPrice	cfx_gasPrice
eth_getBalance	cfx_getBalance
eth_getBlockByHash	cfx_getBlockByHash
eth_getBlockByNumber	cfx_getBlockByEpochNumber
eth_getCode	cfx_getCode
eth_getLogs	cfx_getLogs
eth_getStorageAt	cfx_getStorageAt
eth_getTransactionByHash	cfx_getTransactionByHash
eth_getTransactionCount	cfx_getNextNonce
eth_getTransactionReceipt	cfx_getTransactionReceipt
eth_sendRawTransaction	cfx_sendRawTransaction

GOSSIP, STATE, HISTORY

A handful of core JSON-RPC methods require data from the Conflux network, and fall neatly into three main categories: Gossip, State, and History. Use the links in these sections to jump to each method, or use the table of contents to explore the whole list of methods.

Gossip Method

These methods track the head of the chain. This is how transactions make their way around the network, find their way into blocks, and how clients find out about new blocks.

• cfx_getStatus
• cfx_epochNumber
• cfx_sendRawTransaction

State Methods

Methods that report the current state of all the data stored. The "state" is like one big shared piece of RAM, and includes account balances, contract data, and gas estimations.

• cfx_getBalance
• cfx_getStorageAt
• cfx_getNonce
• cfx_getCode
• cfx_call
• cfx_estimateGasAndCollateral

History Methods

Fetches historical records of every block back to genesis. This is like one large append-only file, and includes all block headers, block bodies, and transaction receipts.

• cfx_getBlockByHash
• cfx_getBlockByEpochNumber
• cfx_getTransactionByHash
• cfx_getTransactionReceipt

JSON-RPC methods

cfx_getTransactionByHash

Returns information about a transaction, identified by its hash.

Parameters

1. DATA, 32 Bytes - hash of a transaction

params: [
    "0x88df016429689c079f3b2f6ad39fa052532c56795b733da78a91ebe6a713944b"
]

Returns

Object - a transaction object, or null when no transaction was found:

• type: QUANTITY - the type of the transaction. 0x0 for legacy transactions, 0x1 for CIP-2930 transactions, 0x2 for CIP-1559 transactions.
• blockHash: DATA, 32 Bytes - hash of the block where this transaction was in and got executed. null when the transaction is pending.
• chainId: QUANTITY - the chain ID specified by the sender.
• contractCreated: BASE32 - address of the contract created. null when it is not a contract deployment transaction.
• data: DATA - the data sent along with the transaction.
• epochHeight: QUANTITY - the epoch proposed by the sender. Note that this is NOT the epoch of the block containing this transaction.
• from: BASE32 - address of the sender.
• gas: QUANTITY - gas provided by the sender.
• gasPrice: QUANTITY - gas price provided by the sender in Drip.
• hash: DATA, 32 Bytes - hash of the transaction.
• nonce: QUANTITY - the number of transactions made by the sender prior to this one.
• r: DATA, 32 Bytes - ECDSA signature r.
• s: DATA, 32 Bytes - ECDSA signature s.
• status: QUANTITY - 0 for success, 1 if an error occurred, 2 for skipped, null when the transaction is skipped or not packed.
• storageLimit: QUANTITY - the storage limit specified by the sender.
• to: BASE32 - address of the receiver. null when it is a contract deployment transaction.
• transactionIndex: QUANTITY - the transaction's position in the block. null when the transaction is pending.
• v: QUANTITY - ECDSA recovery id.
• value: QUANTITY - value transferred in Drip.
• maxGasFeePerGas: QUANTITY - The maximum total fee per gas the sender is willing to pay (includes the network / base fee and miner / priority fee) in Drip.
• maxPriorityFeePerGas: QUANTITY - Maximum fee per gas the sender is willing to pay to miners in Drip.
• accessList: ARRAY - EIP-2930 access list
• yParity: QUANTITY - The parity (0 for even, 1 for odd) of the y-value of the secp256k1 signature.

Note that the fields blockHash, contractCreated, status, and transactionIndex are provided by the node as they depend on the transaction's position within the ledger. The rest of the fields are included in or derived from the original transaction.

Note that the fields type, maxGasFeePerGas, maxPriorityFeePerGas, yParity, and accessList are included in the response from Conflux-rust v2.4.0.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getTransactionByHash","params":["0x497755f45baef13a35347933c48c0b8940f2cc3347477b5ed9f165581b082699"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "type": "0x2",
    "blockHash": "0x564750c06c7afb10de8beebcf24411cc73439295d5abb1264d2c9b90eee5606f",
    "chainId": "0x2",
    "contractCreated": null,
    "data": "0x0",
    "epochHeight": "0x909c9f",
    "from": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
    "gas": "0xf4240",
    "gasPrice": "0x174876e800",
    "hash": "0x497755f45baef13a35347933c48c0b8940f2cc3347477b5ed9f165581b082699",
    "nonce": "0x3b518",
    "r": "0x14da6cff1a3cd864b04d1b16f480fa023f449322e318b04bb1109b5754b516ce",
    "s": "0x304070abe6488c3532ecb66f4be32b88ee35ce48a4607b8d0c86461987a79fc7",
    "status": "0x0",
    "storageLimit": "0x100",
    "to": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
    "transactionIndex": "0x0",
    "v": "0x1",
    "value": "0x3635c9adc5dea00000",
    "accessList": [],
    "maxFeePerGas": "0x4a817c800",
    "maxPriorityFeePerGas": "0x4a817c800",
    "yParity": "0x0"
  },
  "id": 1
}

---

cfx_getBlockByHash

Returns information about a block, identified by its hash.

Parameters

1. DATA - 32 Bytes - hash of a block.
2. Boolean - if true, it returns the full transaction objects. If false, only the hashes of the transactions are returned.

params: [
    "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331",
    true
]

Returns

Object - A block object, or null when no block was found:

• adaptive: Boolean - true if the weight of the block is adaptive under the GHAST rule.
• blame: QUANTITY - if 0, then this block does not blame any blocks on its parent path. If it is n > 0, then this block blames its n predecessors on its parent path, e.g. when n = 1, then the block blames its parent but not its parent's parent.
• deferredLogsBloomHash: DATA, 32 Bytes - the hash of the logs bloom after deferred execution at the block's epoch (assuming it is the pivot block).
• deferredReceiptsRoot: DATA, 32 Bytes - the Merkle root of the receipts after deferred execution at the block's epoch (assuming it is the pivot block).
• deferredStateRoot: DATA, 32 Bytes - the hash of the state trie root triplet after deferred execution at the block's epoch (assuming it is the pivot block).
• difficulty: QUANTITY - the PoW difficulty of this block.
• epochNumber: QUANTITY - the number of the epoch containing this block in the node's view of the ledger. null when the epoch number is not determined (e.g. the block is not in the best block's past set).
• gasLimit: QUANTITY - determines the gas limit of the block. from Conflux-rust v2.4.0, a factor 0.9 is multiplied to get the core space block gas limit. For example, if the gasLimit field value is 60,000,000, the actual maximum of the sum of the transaction gas limit is 54,000,000.
• gasUsed: QUANTITY - the total gas used in this block. null when the block is pending.
• hash: DATA, 32 Bytes - hash of the block.
• height: QUANTITY - the height of the block.
• miner: BASE32 - the address of the beneficiary to whom the mining rewards were given.
• nonce: DATA, 8 Bytes - hash of the generated proof-of-work.
• parentHash: DATA, 32 Bytes - hash of the parent block.
• powQuality: DATA - the PoW quality. null when the block is pending.
• refereeHashes: Array - array of referee block hashes.
• size: QUANTITY - the size of this block in bytes, excluding the block header.
• timestamp: QUANTITY - the unix timestamp for when the block was created.
• transactions: Array - array of transaction objects, or 32-byte transaction hashes, depending on the second parameter.
• transactionsRoot: DATA, 32 Bytes - the Merkle root of the transactions in this block.
• custom: Array- customized information. Note from v2.0 custom's type has changed from array of number array to array of hex string.
• blockNumber: QUANTITY - the number of this block's total order in the tree-graph. null when the order is not determined. Added from Conflux-rust v1.1.5
• posReference: DATA, 32 Bytes - the hash of the PoS newest committed block. Added from Conflux-rust v2.0.0
• baseFeePerGas: QUANTITY - the base fee per gas in the block. Added from Conflux-rust v2.4.0

Note that the fields epochNumber and gasUsed are provided by the node as they depend on the ledger. The rest of the fields are included in or derived from the block header directly.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockByHash","params":["0x692373025c7315fa18b2d02139d08e987cd7016025920f59ada4969c24e44e06", false],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "adaptive": false,
    "blame": 0,
    "deferredLogsBloomHash": "0xd397b3b043d87fcd6fad1291ff0bfd16401c274896d8c63a923727f077b8e0b5",
    "deferredReceiptsRoot": "0x522717233b96e0a03d85f02f8127aa0e23ef2e0865c95bb7ac577ee3754875e4",
    "deferredStateRoot": "0xd449df4ba49f5ab02abf261e976197beecf93c5198a6f0b6bd2713d84115c4ec",
    "difficulty": "0xeee440",
    "epochNumber": "0x1394cb",
    "gasLimit": "0xb2d05e00",
    "gasUsed": "0xad5ae8",
    "hash": "0x692373025c7315fa18b2d02139d08e987cd7016025920f59ada4969c24e44e06",
    "height": "0x1394c9",
    "miner": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
    "nonce": "0x329243b1063c6773",
    "parentHash": "0xd1c2ff79834f86eb4bc98e0e526de475144a13719afba6385cf62a4023c02ae3",
    "powQuality": "0x2ab0c3513",
    "refereeHashes": [
      "0xcc103077ede14825a5667bddad79482d7bbf1f1a658fed6894fa0e9287fc6be1"
    ],
    "size": "0x180",
    "timestamp": "0x5e8d32a1",
    "transactions": [
      "0xedfa5b9c38ba51e791cc72b8f75ff758533c8c38f426eddee3fd95d984dd59ff"
    ],
    "custom": ["0x12"],
    "transactionsRoot": "0xfb245dae4539ea49812e822adbffa9dd2ee9b3de8f3d9a7d186d351dcc9a6ed4",
    "posReference": "0xd1c2ff79834f86eb4bc98e0e526de475144a13719afba6385cf62a4023c02ae3",
    "baseFeePerGas": "0x4a817c800"
  },
  "id": 1
}

---

cfx_getBlockByEpochNumber

Returns information about a block, identified by its epoch number.

Parameters

1. QUANTITY|TAG - the epoch number, or the string "latest_mined", "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter.
2. Boolean - if true, it returns the full transaction objects. If false, only the hashes of the transactions are returned

params: [
    "latest_mined",
    true
]

Returns

See cfx_getBlockByHash.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockByEpochNumber","params":["latest_mined", false],"id":1}' -H "Content-Type: application/json" localhost:12539

Result see cfx_getBlockByHash.

---

cfx_getBestBlockHash

Returns the hash of the best block.

Parameters

None.

Returns

DATA, 32 Bytes - hash of the best block.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBestBlockHash","id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc" : "2.0",
    "result" : "0x7d54c03f4fe971d5c45d95dddc770a0ec8d5bd27d57c049ce8adc469269e35a4",
    "id" : 1
}

---

cfx_epochNumber

Returns the epoch number corresponding to the given tag.

Parameters

1. TAG - (optional, default: "latest_mined") String "latest_mined", "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter.

Returns

QUANTITY - the integer epoch number corresponding to the given tag.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_epochNumber","params":["latest_mined"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc" : "2.0",
    "result" : "0x49",
    "id" : 1
}

---

cfx_gasPrice

Returns the current price per gas in Drip.

Parameters

None.

Returns

QUANTITY - integer of the current gas price in Drip.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_gasPrice","id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc" : "2.0",
    "result" : "0x09184e72a000",
    "id" : 1
}

---

cfx_maxPriorityFeePerGas

Returns the current priority fee per gas in Drip.

Parameters

None.

Returns

QUANTITY - integer of the current priority fee per gas in Drip.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_maxPriorityFeePerGas","id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc" : "2.0",
    "result" : "0x09184e72a000",
    "id" : 1
}

---

cfx_feeHistory

Returns transaction base fee per gas and effective priority fee per gas for the requested/supported epoch range.

Added from Conflux-rust v2.4.0.

Parameters

1. QUANTITY - the number of epochs to query.
2. QUANTITY|TAG - the epoch number or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter.
3. Array - A monotonically increasing float list of percentile values. For each block in the requested range, the transactions will be sorted in ascending order by effective tip per gas and the coresponding effective tip for the percentile will be determined, accounting for gas consumed.

Returns

• baseFeePerGas: Array - An array of block base fees per gas. This array will include an extra element.
• gasUsedRatio: Array - An array of block gas used ratios. These are calculated as the ratio of tx gasLimit sum and block gasLimit.
• oldestEpoch: QUANTITY - Lowest epoch number of returned range.
• reward: Array - A two-dimensional array of effective priority fees per gas at the requested block percentiles.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_feeHistory", "params": ["0x5", "latest_state", [20, 30]],"id":1}' -H "Content-Type: application/json" localhost:12537

// Result
{
    "jsonrpc": "2.0",
    "result": {
        "baseFeePerGas": [
            "0x3b9aca00",
            "0x3b9aca00",
            "0x3b9aca00",
            "0x3b9aca00",
            "0x3b9aca00",
            "0x3b9aca00"
        ],
        "gasUsedRatio": [
            0.0,
            0.0,
            0.0,
            0.0,
            0.0
        ],
        "oldestEpoch": "0x2a8d0",
        "reward": [
            [
                "0x0",
                "0x0"
            ],
            [
                "0x0",
                "0x0"
            ],
            [
                "0x0",
                "0x0"
            ],
            [
                "0x0",
                "0x0"
            ],
            [
                "0x0",
                "0x0"
            ]
        ]
    },
    "id": "15922956697249514502"
}

---

cfx_getBlocksByEpoch

Returns the block hashes in the specified epoch.

Parameters

1. QUANTITY|TAG - the epoch number, or the string "latest_mined", "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter.

Returns

Array - array of block hashes, sorted by their execution (topological) order. Note that the last one is the pivot hash.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlocksByEpoch","params":["0x11"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc": "2.0",
    "result": [
        "0x618e813ed93f1020bab13a1ab77e1550da6c89d9c69de837033512e91ac46bd0",
        "0x0f6ac81dcbc612e72e0019681bcec32254a34bd29a6bbab91e5e8dc37ecb64d5",
        "0xad3238c00456adfbf847d251b004c1e306fe637227bb1b9917d77bd5b207af68",
        "0x0f92c2e796be7b016d8b74c6c270fb1851e47fabaca3e464d407544286d6cd34",
        "0x5bcc2b8d2493797fcadf7b80228ef5b713eb9ff65f7cdd86562db629d0caf721",
        "0x7fcdc6fff506b19a2bd72cd3430310915f19a59b046759bb790ba4eeb95e9956",
        "0xf4f33ed08e1c625f4dde608eeb92991d77fff26122bab28a6b3a2037511dcc83",
        "0xa3762adc7f066d5cb62c683c2655be3bc3405ff1397f77d2e1dbeff2d8522e00",
        "0xba7588476a5ec7e0ade00f060180cadb7430fd1be48940414baac48c0d39556d",
        "0xe4dc4541d07118b598b2ec67bbdaa219eb1d649471fe7b5667a0001d83b1e9b6",
        "0x93a15564544c57d6cb68dbdf60133b318a94439e1f0a9ccb331b0f5a0aaf8049"
    ],
    "id": 1
}

---

cfx_getBalance

Returns the balance of the given account, identified by its address.

Parameters

1. BASE32 - address to check for balance.
2. QUANTITY|TAG|BLOCKHASH_PARAMETER - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter, or the EIP-1898 blockHash parameter.

params: [
   "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
   "latest_state"
]

Returns

QUANTITY - integer of the current balance in Drip.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBalance","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc": "2.0",
    "result": "0x0234c8a3397aab58", // 158972490234375000
    "id": 1
}

---

cfx_getStakingBalance

Returns the stacking balance of the given account, identified by its address.

Parameters

1. BASE32 - address to check for staking balance.
2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
   "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
   "latest_state"
]

Returns

QUANTITY - integer of the current staking balance in Drip.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getStakingBalance","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc": "2.0",
    "result": "0x0234c8a3397aab58", // 158972490234375000
    "id": 1
}

---

cfx_getCollateralForStorage

Returns the size of the collateral storage of a given address, in bytes.

Parameters

1. BASE32 - address to check for collateral storage.
2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
   "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
   "latest_state"
]

Returns

QUANTITY - integer of the collateral storage in Byte.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getCollateralForStorage","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc": "2.0",
    "result": "0x0234c8a8",
    "id": 1
}

---

cfx_getAdmin

Returns the admin of the specified contract.

Parameters

1. BASE32 - address of the contract.
2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
    "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
    "latest_state"
]

Returns

BASE32 - address of admin, or null if the contract does not exist.

note

Although meaningless, it is also possible to use user address as the input parameter of cfx_getAdmin method. In this case, the return value will be zero address if the input user address exists in the world state, else null will be returned.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getAdmin","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
  "id": 1
}

---

cfx_getCode

Returns the code of the specified contract. If contract not exist will return 0x

Parameters

1. BASE32 - address of the contract.
2. QUANTITY|TAG|BLOCKHASH_PARAMETER - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter, or the EIP-1898 blockHash parameter.

params: [
    "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
    "latest_state"
]

Returns

DATA - byte code of the contract, or 0x if the account has no code.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getCode","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": "0x6080604052600436106100705760003560e01c80638da5cb5b1161004e5780638da5cb5b14610146578063a035b1fe14610",
  "id": 1
}

---

cfx_getStorageAt

Returns storage entries from a given contract.

Parameters

1. BASE32 - address of the contract.
2. QUANTITY - a storage position (see here for more info).
3. QUANTITY|TAG|BLOCKHASH_PARAMETER - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter, or the EIP-1898 blockHash parameter.

params: [
    "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
    "0x100",
    "latest_state"
]

Returns

DATA - 32 Bytes - the contents of the storage position, or null if the contract does not exist.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getStorageAt","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","0x100","latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": "0x0000000000000000000000001dbda5dd2e952914bc74a802510d0fa59f9d7636",
  "id": 1
}

---

cfx_getStorageRoot

Returns the storage root of a given contract.

Parameters

1. BASE32 - address of the contract.
2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
    "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
    "latest_state"
]

Returns

Object - A storage root object, or null if the contract does not exist:

• delta: DATA, 32 Bytes - the storage root in the delta trie, or the string "TOMBSTONE", or null.
• intermediate: DATA, 32 Bytes - storage root in the intermediate trie, or the string "TOMBSTONE", or null.
• snapshot: DATA, 32 Bytes - storage root in the snapshot, or the string "TOMBSTONE", or null.

If all three of these fields match for two invocations of this RPC, the contract's storage is guaranteed to be identical. If they do not match, storage has likely changed (or the system transitioned into a new era).

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getStorageRoot","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "delta": "0x0240a5a3486ac1cee71db22b8e12f1bb6ac9f207ecd81b06031c407663c20a94",
    "intermediate": "0x314a41f277b678a1dc811a1fc0393b6d30c35e900cb27762ec9e9042bfdbdd49",
    "snapshot": "0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470"
  },
  "id" :1
}

---

cfx_getSponsorInfo

Returns the sponsor info of a given contract.

Parameters

1. BASE32 - address of the contract.
2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
    "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
    "latest_state"
]

Returns

Object - A sponsor info object. If the contract doesn't have a sponsor, then all fields in the object returned will be 0:

• sponsorBalanceForCollateral: QUANTITY - the sponsored balance for storage.
• sponsorBalanceForGas: QUANTITY - the sponsored balance for gas.
• sponsorGasBound: QUANTITY - the max gas that could be sponsored for one transaction.
• sponsorForCollateral: BASE32 - the address of the storage sponsor.
• sponsorForGas: BASE32 - the address of the gas sponsor.
• usedStoragePoints: QUANTITY - storage points already used.
• availableStoragePoints: QUANTITY - the storage points available for sponsorship.

Hard fork v2.3 provides the introduction for storage points. Refer to CIP-107 for the detailed explanation.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getSponsorInfo","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "sponsorBalanceForCollateral": "0x0",
    "sponsorBalanceForGas": "0x0",
    "sponsorForCollateral": "CFX:TYPE.NULL:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA0SFBNJM2",
    "sponsorForGas": "CFX:TYPE.NULL:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA0SFBNJM2",
    "sponsorGasBound": "0x0"
  },
  "id": 1
}

---

cfx_getNextNonce

Returns the next nonce that should be used by the given account when sending a transaction.

Parameters

1. BASE32 - address of the account.
2. QUANTITY|TAG|BLOCKHASH_PARAMETER - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter, or the EIP-1898 blockHash parameter.

params: [
    "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
    "latest_state"
]

Returns

QUANTITY - integer of the next nonce that should be used by the given address.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getNextNonce","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc" : "2.0",
    "result" : "0xe3269d",
    "id" : 1
}

---

cfx_sendRawTransaction

Sends a signed transaction into the network for processing.

Parameters

1. DATA, the signed transaction data.

params: [
    "0xf86eea8201a28207d0830f4240943838197c0c88d0d5b13b67e1bfdbdc132d4842e389056bc75e2d631000008080a017b8b26f473820475edc49bd153660e56b973b5985bbdb2828fceacb4c91f389a03452f9a69da34ef35acc9c554d7b1d63e9041141674b42c3abb1b57b9f83a2d3"
]

Returns

DATA, 32 Bytes - the transaction hash.

Common Errors

Check send raw transaction errors for details.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_sendRawTransaction","params":[{see above}],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc": "2.0",
    "result": "0xf5338a6cb85d10acc9108869f94fe322b2dfa2715d16d264676c91f6a0404b61",
    "id": 1
}

---

cfx_call

Virtually calls a contract, returns the output data. The transaction will not be added to the blockchain. The error message of cfx_call is similar to cfx_estimateGasAndCollateral and error solutions can be found in cfx_estimateGasAndCollateral behaviour#errors.

Parameters

1. Object - a call request object:

   • from: BASE32 - (optional, default: random address) address of sender.
   • to: BASE32 - (optional, default: null for contract creation) address of receiver.
   • gasPrice: QUANTITY - (optional, default: 0) gas price provided by the sender in Drip.
   • gas: QUANTITY - (optional, default: 500000000) gas provided by the sender.
   • value: QUANTITY - (optional, default: 0) value transferred in Drip.
   • data: DATA - (optional, default: 0x) the data send along with the transaction.
   • nonce: QUANTITY - (optional, default: 0) the number of transactions made by the sender prior to this one.
   • type: QUANTITY - (optional, default: 0x0) the type of the transaction, 0x0 for legacy, 0x1 for EIP-2930, 0x2 for EIP-1559. Added from Conflux-rust v2.4.0
   • accessList: ARRAY - (optional, default: []) the eip-2930 access list. Added from Conflux-rust v2.4.0
   • maxFeePerGas: QUANTITY - (optional, default: 0) the max fee per gas in Drip. Added from Conflux-rust v2.4.0
   • maxPriorityFeePerGas: QUANTITY - (optional, default: 0) the max priority fee per gas in Drip. Added from Conflux-rust v2.4.0

2. QUANTITY|TAG|BLOCKHASH_PARAMETER - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter, or the EIP-1898 blockHash parameter.

params: [
    {
        "from": "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
        "to": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
        "data": "0xa6f2ae3a",
        "gasPrice": "0x2540be400",
        "nonce": "0x0"
    },
    "latest_state"
]

Returns

DATA, Bytes - the output data, or an execution error.

Example

// Request
curl -X POST --data '{"method":"cfx_call","id":1,"jsonrpc":"2.0","params":[{"from":"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg","to":"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","data":"0xa6f2ae3a","gasPrice":"0x2540be400","nonce":"0x0"}]}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": "0x",
  "id": 1
}

---

cfx_estimateGasAndCollateral

Virtually executes a transaction, returns an estimate for the size of storage collateralized and the gas used by the transaction. The transaction will not be added to the blockchain.

The response of the cfx_estimateGasAndCollateral interface is contingent on whether specific fields in the input are present or absent. Please refer to cfx_estimateGasAndCollateral behaviour for the detailed information. The error reason and solution can also be found in cfx_estimateGasAndCollateral behaviour#errors.

Parameters

See cfx_call.

params: [
    {
        "from": "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
        "to": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
        "data": "0x",
        "gasPrice": "0x2540be400",
        "nonce": "0x0"
    },
    "latest_state"
]

Returns

Object - an estimate result object:

• gasLimit: QUANTITY - the recommended gas_limit.
• gasUsed: QUANTITY - gas used during execution.
• storageCollateralized: QUANTITY - size of storage collateralized, in bytes.

Example

// Request
curl -X POST --data '{"method":"cfx_estimateGasAndCollateral","id":1,"jsonrpc":"2.0","params":[{"from":"cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg","to":"cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp","data":"0x","gasPrice":"0x2540be400","nonce":"0x0"}]}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "gasLimit": "0x6d60",
    "gasUsed": "0x5208",
    "storageCollateralized": "0x80"
  },
  "id": 1
}

---

cfx_getLogs

Returns logs matching the filter provided.

Parameters

1. Object - A log filter object:
   • fromEpoch: QUANTITY|TAG - (optional, default: "latest_checkpoint") the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter. Search will be applied from this epoch number.
   • toEpoch: QUANTITY|TAG - (optional, default: "latest_state") the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter. Search will be applied up until (and including) this epoch number.
   • fromBlock: QUANTITY - (optional, default: null). Search will be applied from this specified block.
   • toBlock: QUANTITY - (optional, default: null). Search will be applied untial (and including) this specified block.
   • blockHashes: Array of DATA - (optional, default: null) Array of up to 128 block hashes that the search will be applied to. This will override from/to epoch fields if it's not null.
   • address: Array of BASE32 - (optional, default: null) Search contract addresses. If null, match all. If specified, the log must be produced by one of these contracts.
   • topics: Array - (optional, default: null) 32-byte earch topics. Logs can have 4 topics: the event signature and up to 3 indexed event arguments. The elements of topics match the corresponding log topics. Example: ["0xA", null, ["0xB", "0xC"], null] matches logs with "0xA" as the 1st topic AND ("0xB" OR "0xC") as the 3rd topic. If null, match all.

params: [
    {
        "fromEpoch": "0x873e12",
        "toEpoch": "0x87431b",
        "address": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
        "topics": [["0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5", "0xd7fb65c06987247ab480a21659e16bdf0b5862a19869ec264075d50ab3525435"], null, "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26"],
    }
]

Returns

Array - array of log objects corresponding to the matching logs:

• address: BASE32 - address of the contract that emitted the log.
• topics: Array of DATA - array of 32-byte event topics.
• data: DATA - data of log.
• blockHash: DATA - 32 Bytes - hash of the block containing the log.
• epochNumber: QUANTITY - epoch number of the block containing the log.
• transactionHash: DATA, 32 Bytes - hash of the transaction that created the log.
• transactionIndex: QUANTITY - transaction index in the block.
• logIndex: QUANTITY - log index in block.
• transactionLogIndex: QUANTITY - log index in transaction.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getLogs","params":[{ "fromEpoch": "0x873e12", "toEpoch": "0x87431b", "address": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp", "topics": [["0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5", "0xd7fb65c06987247ab480a21659e16bdf0b5862a19869ec264075d50ab3525435"], null, "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26"], "limit": "0x2" }],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": [{
    "address": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
    "blockHash": "0x44531df7bad30d39dfaf844e7c7eb44628467e9bd8474d313397c664a1b9fd14",
    "data": "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26",
    "epochNumber": "0x873e12",
    "logIndex": "0x0",
    "topics": [
        "0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5",
        "0x000000000000000000000000873c4bd4d847bcf7dc066bf4a7cd31dcf182258c",
        "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26",
    ],
    "transactionHash": "0x7c2536d287c9ac5445f30ccfa067d1f4a2d68d6843f4ba25a5e6d20349367eb3",
    "transactionIndex": "0x0",
    "transactionLogIndex": "0x0"
  }, {
    "address": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
    "blockHash": "0x82da9c6ef8a93036ac75b176230dd88c8fe1727104ab01878b54180f0fa25638",
    "data": "0x00000000000000000000000019a3224214fe29107d84af9baa02118b614e46d5",
    "epochNumber": "0x87431b",
    "logIndex": "0x0",
    "topics": [
        "0xd7fb65c06987247ab480a21659e16bdf0b5862a19869ec264075d50ab3525435",
        "0x000000000000000000000000873c4bd4d847bcf7dc066bf4a7cd31dcf182258c",
        "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26",
    ],
    "transactionHash": "0xef11f262e31bc7ead1d0880b7c90855eb8f0ef7c26a198e805f2b9f1e9bc938b",
    "transactionIndex": "0x0",
    "transactionLogIndex": "0x0"
  }],
  "id": 1
}

---

cfx_getTransactionReceipt

Returns a transaction receipt, identified by the corresponding transaction hash.

Parameters

1. DATA, 32 Bytes - hash of a transaction

params: [
    "0x53fe995edeec7d241791ff32635244e94ecfd722c9fe90f34ddf59082d814514",
]

Returns

Object - a transaction receipt object, or null when no transaction was found or the transaction was not executed yet:

• type: QUANTITY - the type of the transaction, 0x0 for legacy, 0x1 for EIP-2930, 0x2 for EIP-1559. Added from Conflux-rust v2.4.0
• transactionHash: DATA, 32 Bytes - hash of the given transaction.
• index: QUANTITY - transaction index within the block.
• blockHash: DATA, 32 Bytes - hash of the block where this transaction was in and got executed.
• epochNumber: QUANTITY - epoch number of the block where this transaction was in and got executed.
• from: BASE32 - address of the sender.
• to: BASE32 - address of the receiver. null when it is a contract deployment transaction.
• gasUsed: QUANTITY - gas used for executing the transaction.
• gasFee: QUANTITY - gas charged to the sender's account. If the provided gas (gas limit) is larger than the gas used, at most 1/4 of it is refunded.
• gasCoveredBySponsor: Boolean, true if this transaction's gas fee was covered by the sponsor.
• storageCollateralized: QUANTITY, the amount of storage collateral this transaction required.
• storageCoveredBySponsor: Boolean, true if this transaction's storage collateral was covered by the sponsor.
• storageReleased: Array, array of storage change objects, each specifying an address and the corresponding amount of storage collateral released, e.g., [{ 'address': 'CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG', 'collaterals': '0x280' }]
• contractCreated: BASE32 - address of the contract created. null when it is not a contract deployment transaction.
• stateRoot: DATA, 32 Bytes - hash of the state root after the execution of the corresponding block. 0 if the state root is not available.
• outcomeStatus: QUANTITY - the outcome status code. 0x0 means success. 0x1 means failed. 0x2 means skipped
• logsBloom: DATA, 256 Bytes - bloom filter for light clients to quickly retrieve related logs.
• logs: Array - array of log objects that this transaction generated, see cfx_getLogs.
• txExecErrorMsg: String, tx exec fail message, if transaction exec success this will be null.
• effectiveGasPrice: QUANTITY - the effective gas price of the transaction. Added from Conflux-rust v2.4.0
• burntGasFee: QUANTITY - the burnt gas fee of the transaction. Added from Conflux-rust v2.4.0

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getTransactionReceipt","params":["0x53fe995edeec7d241791ff32635244e94ecfd722c9fe90f34ddf59082d814514"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "blockHash": "0xbb1eea3c8a574dc19f7d8311a2096e23a39f12e649a20766544f2df67aac0bed",
    "contractCreated": null,
    "epochNumber": "0x87431b",
    "from": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
    "gasCoveredBySponsor": true,
    "gasFee": "0x108ca",
    "gasUsed": "0x8465",
    "index": "0x0",
    "logs": [{
      "address": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
      "data": "0x00000000000000000000000019a3224214fe29107d84af9baa02118b614e46d5",
      "topics": ["0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5"]
    }],
    "logsBloom": "0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000100000000000080000000000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000000000000000000000000",
    "outcomeStatus": "0x0",
    "stateRoot": "0x1bc37c63c03d7e7066f9427f69e515988d19ebb26998087d75b50d2235e55ee7",
    "storageCollateralized": "0x40",
    "storageCoveredBySponsor": true,
    "storageReleased": [{
      "address": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
      "collaterals": "0x40"
    }],
    "to": "CFX:TYPE.CONTRACT:ACC7UAWF5UBTNMEZVHU9DHC6SGHEA0403Y2DGPYFJP",
    "transactionHash": "0x53fe995edeec7d241791ff32635244e94ecfd722c9fe90f34ddf59082d814514",
    "txExecErrorMsg": null
  },
  "id": 1
}

---

cfx_getAccount

Returns an account, identified by its address.

Parameters

1. BASE32 - address of the account.
2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
   "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
   "latest_state"
]

Returns

Object - the state of the given account:

• address: BASE32 - address of the account.
• balance: QUANTITY - the balance of the account.
• nonce: QUANTITY - the nonce of the account's next transaction.
• codeHash: DATA - the code hash of the account.
• stakingBalance: QUANTITY - the staking balance of the account.
• collateralForStorage: QUANTITY - the collateral storage of the account.
• accumulatedInterestReturn: QUANTITY - accumulated interest return of the account.
• admin: BASE32 - admin of the account.

Example

// Request
curl --data '{"jsonrpc":"2.0","method":"cfx_getAccount","params":["cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "accumulatedInterestReturn": "0x0",
    "admin": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
    "balance": "0x0",
    "codeHash": "0x45fed62dd2b7c5ed76a63628ddc811e69bb5770cf31dd55647ca219aaee5434f",
    "collateralForStorage": "0x0",
    "nonce": "0x1",
    "stakingBalance": "0x0"
  },
  "id": 1
}

---

cfx_getInterestRate

Returns the interest rate at the given epoch.

Parameters

1. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
   "latest_state"
]

Returns

QUANTITY - the interest rate at the given epoch.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getInterestRate","params":["latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": "0x24b675dc000",
  "id": 1
}

---

cfx_getAccumulateInterestRate

Returns the accumulate interest rate at the given epoch.

Parameters

1. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
   "latest_state"
]

Returns

QUANTITY - the accumulate interest rate at the given epoch.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getAccumulateInterestRate","params":["latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": "0x3c35a9e557dc9ef76719db0226f",
  "id": 1
}

---

cfx_checkBalanceAgainstTransaction

Check if a user's balance is enough to send a transaction with the specified gas and storage limits to the specified contract. The balance is enough if the user can cover the up-front payment of both execution and storage, or if these costs are sponsored by the contract.

Parameters

1. BASE32, account address
2. BASE32, contract address
3. QUANTITY, gas limit
4. QUANTITY, gas price
5. QUANTITY, storage limit
6. QUANTITY|TAG, (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter.

params: [
  "cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg",
  "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
  "0x5208",
  "0x2540be400",
  "0x0",
  "0xbf63"
]

Returns

• isBalanceEnough: Boolean - indicate balance is enough for gas fee and collateral storage
• willPayCollateral: Boolean - false if the transaction is eligible for storage collateral sponsorship, true otherwise.
• willPayTxFee: Boolean - false if the transaction is eligible for gas sponsorship, true otherwise.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_checkBalanceAgainstTransaction","params":["cfx:type.user:aarc9abycue0hhzgyrr53m6cxedgccrmmyybjgh4xg", "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp", "0x5208", "0x2540be400", "0x0", "0xbf63"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "isBalanceEnough": true,
    "willPayCollateral": true,
    "willPayTxFee": true
  },
  "id": 1
}

---

cfx_getSkippedBlocksByEpoch

Returns the list of non-executed blocks in an epoch. By default, Conflux only executes the last 200 blocks in each epoch (note that under normal circumstances, epochs should be much smaller).

Parameters

1. QUANTITY|TAG - integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
  "0xba28"
]

Returns

• Array of block hashes

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getSkippedBlocksByEpoch","params":["0xba28"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": [],
  "id": 1
}

---

cfx_getConfirmationRiskByHash

Returns the confirmation risk of a given block, identified by its hash.

Parameters

1. DATA, 32 Bytes - the block hash.

params: [
  "0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c"
]

Returns

• QUANTITY, the integer confirmation risk, or null if the block does not exist.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getConfirmationRiskByHash","params":["0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": "0x2af31dc4611873bf3f70834acdae9f0f4f534f5d60585a5f1c1a3ced1b",
  "id": 1
}

---

cfx_getStatus

Returns the node status.

Parameters

None.

Returns

• bestHash: DATA - hash of the latest epoch's pivot block
• blockNumber: QUANTITY - total block number
• chainId: QUANTITY - chainId
• networkId: QUANTITY - networkId
• ethereumSpaceChainId: QUANTITY - eSpace's chainId (Added from v2.0)
• epochNumber: QUANTITY - latest epoch number
• latestCheckpoint: QUANTITY - latest checkpoint epoch number
• latestConfirmed: QUANTITY - latest confirmed epoch number
• latestFinalized: QUANTITY - latest finallized epoch number (Added from v2.0)
• latestState: QUANTITY - latest state epoch number
• pendingTxNumber: QUANTITY - current pending transaction count

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getStatus","id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "bestHash": "0xe4bf02ad95ad5452c7676d3dfc2e57fde2a70806c2e68231c58c77cdda5b7c6c",
    "chainId": "0x1",
    "networkId": "0x1",
    "blockNumber": "0x1a80325",
    "epochNumber": "0xaf28ab",
    "latestCheckpoint": "0xada520",
    "latestConfirmed": "0xaf2885",
    "latestState": "0xaf28a7",
    "latestFinalized": "0x2a420c",
    "ethereumSpaceChainId": "0x22b9",
    "pendingTxNumber": "0x0"
  },
  "id": 1
}

---

cfx_clientVersion

Returns the conflux-rust version.

Parameters

None.

Returns

• STRING - the client version

Example

//Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_clientVersion","id":1}' -H "Content-Type: application/json" localhost:12539

//Result
{
  "jsonrpc": "2.0",
  "result": "conflux-rust-0.6.3",
  "id": 1
}

---

cfx_getBlockRewardInfo

Returns the reward info for all executed blocks in the specified epoch.

Parameters

1. QUANTITY|TAG - integer epoch number, or the string "latest_checkpoint", see the epoch number parameter

params: [
  "0x5ee248"
]

Please note that reward calculation is delayed so it might not be available for the latest few epochs (including "latest_state").

Returns

Array - array of reward info objects

• blockHash: DATA - the block hash
• author: BASE32 - the address of block miner
• totalReward: QUANTITY - total reward of the block including base reward, tx fee, staking reward
• baseReward: QUANTITY - base reward
• txFee: QUANTITY - tx fee

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockRewardInfo","params":["0x5ee248"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": [
    {
      "author": "CFX:TYPE.USER:AARC9ABYCUE0HHZGYRR53M6CXEDGCCRMMYYBJGH4XG",
      "baseReward": "0x9ccda666a9516000",
      "blockHash": "0xa4a409ea5f1d31e787cd5e20a3eec1fd43851d29608d2de98fb127f518e1a211",
      "totalReward": "0x9ccdca639a29ece1",
      "txFee": "0x0"
    }
  ],
  "id": 1
}

---

cfx_getBlockByHashWithPivotAssumption

Returns the requested block if the provided pivot hash is correct, returns an error otherwise.

Parameters

• DATA, block hash
• DATA, assumed pivot hash
• QUANTITY, integer epoch number.

params: [
   "0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c",
   "0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c",
   "0xba28"
]

Returns

See cfx_getBlockByHash.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockByHashWithPivotAssumption","params":["0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c", "0x3912275cf09f8982a69735a876c14584dae95078762090c5d32fdf0dbec0647c", "0xba28"],"id":1}' -H "Content-Type: application/json" localhost:12539

Result see cfx_getBlockByHash.

---

cfx_getDepositList

Returns the deposit list of the given account, identified by its address.

Parameters

1. BASE32 - address of the account.
2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
   "cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u",
   "latest_state"
]

Returns

Array - array of deposit info objects:

• accumulatedInterestRate: QUANTITY - the accumulated interest rate at the time of the deposit.
• amount: QUANTITY - the number of tokens deposited.
• depositTime: QUANTITY - the time of the deposit.

Example

// Request
curl --data '{"jsonrpc":"2.0","method":"cfx_getDepositList","params":["cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": [{
    "accumulatedInterestRate": "0x3c4517ac75006c913c52c2402e8",
    "amount": "0x8ac7230489e80000",
    "depositTime": 3135949
  }, {
    "accumulatedInterestRate": "0x3c451870afdac66f40804d95742",
    "amount": "0x8ac7230489e80000",
    "depositTime": 3136255
  }],
  "id": 1
}

---

cfx_getVoteList

Returns the vote list of the given account, identified by its address.

Parameters

1. BASE32 - address of the account.
2. QUANTITY|TAG - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
   "cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u",
   "latest_state"
]

Returns

Array - array of vote info objects:

• amount: QUANTITY - the number of tokens locked.
• unlockBlockNumber: QUANTITY - the block number at which the locked tokens are released.

For getting the current block number, please refer to conflux-rust#1973.

Example

// Request
curl --data '{"jsonrpc":"2.0","method":"cfx_getVoteList","params":["cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u", "latest_state"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": [{
    "amount": "0x8ac7230489e80000",
    "unlockBlockNumber": 1000000000000
  }],
  "id": 1
}

cfx_getSupplyInfo

Returns summary supply info of the entire chain.

Parameters

None.

Returns

Object - Object include the supply summary info.

• totalIssued: QUANTITY - Amount of total issued CFX in Drip
• totalCollateral: QUANTITY - Amount of total storage collateraled CFX in Drip
• totalStaking: QUANTITY - Amount of total staking CFX in Drip
• totalCirculating: QUANTITY - Amount: TotalIssued - FourYearUnlock - TwoYearUnlock
• totalEspaceTokens: QUANTITY - Amount of total eSpace CFX in Drip (Added in Conflux-Rust v2.0.1)

Example

// Request
curl --data '{"jsonrpc":"2.0","method":"cfx_getSupplyInfo","params":[],"id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
  "jsonrpc": "2.0",
  "result": {
    "totalCirculating": "0x1ed09beade67915041ca95cb0ea3b",
    "totalCollateral": "0x2b95bdcc39b610000",
    "totalIssued": "0x1ed09ced5cda57e32eec33328ea3b",
    "totalStaking": "0x56bc75e2d63100000"
  },
  "id": "15922956697249514502"
}

cfx_getAccountPendingInfo

Returns transaction pool pending info of one account

Parameters

1. BASE32 - address of the account.

params: [
    "cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u"
]

Returns

Object - Object include account's pending info.

• localNonce: QUANTITY - User's transaction pool nonce that can be used for next transaction.
• pendingNonce: QUANTITY - User's current pending nonce
• pendingCount: QUANTITY - Count of pending transaction
• nextPendingTx: DATA - Hash of next pending transaction

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getAccountPendingInfo","params":["cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Response
{
    "jsonrpc": "2.0",
    "result": {
        "localNonce": "0x1ed",
        "nextPendingTx": "0x0000000000000000000000000000000000000000000000000000000000000000",
        "pendingCount": "0x0",
        "pendingNonce": "0x0"
    },
    "id": "15922956697249514502"
}

cfx_getAccountPendingTransactions

Returns pending transactions in pool of one account

Parameters

1. BASE32 - address of the account.
2. [QUANTITY] - Optional start nonce to return
3. [QUANTITY] - Optional limit of pending transactions to return

params: [
    "cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u"
]

Returns

Object - Object include account's pending transaction info.

• firstTxStatus: OBJECT - An object with only one field pending, it's value is the first pending transaction's status. Only have three case futureNonce, notEnoughCash. Or just a string ready
• pendingCount: QUANTITY - Count of pending transactions
• pendingTransactions: ARRAY - Array of pending transaction

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getAccountPendingTransactions","params":["cfx:aan02vpwvz8crpa1n10j17ufceefptdc2yzkagxk5u"],"id":1}' -H "Content-Type: application/json" localhost:12539

// Response
{
    "jsonrpc": "2.0",
    "result": {
        "firstTxStatus": {
            "pending": "futureNonce"
        },
        "pendingCount": "0x1",
        // Reference transaction example
        "pendingTransactions": [
            {
                "...": "..."
            }
        ]
    },
    "id": "15922956697249514502"
}

cfx_getBlockByBlockNumber

Returns information about a block, identified by its block number (block's tree-graph order number).

Added at

Conflux-rust v1.1.5

Parameters

1. QUANTITY - the block number.
2. Boolean - if true, it returns the full transaction objects. If false, only the hashes of the transactions are returned

params: [
    "0x1000",
    true
]

Returns

See cfx_getBlockByHash.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getBlockByBlockNumber","params":["0x1000", false],"id":1}' -H "Content-Type: application/json" localhost:12539

Result see cfx_getBlockByHash.

---

cfx_getPoSEconomics

Returns PoS economics summary info.

Added at

Conflux-rust v2.0.0

Parameters

1. [QUANTITY] - (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

Returns

• distributablePosInterest: QUANTITY Total distributable PoS interest (Unit is Drip)
• lastDistributeBlock: QUANTITY Last block that distributable PoS interest
• totalPosStakingTokens: QUANTITY Total tokens staked in PoS (Unit is Drip)

Example

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw ' {
    "jsonrpc": "2.0",
    "id": "15922956697249514502",
    "method": "cfx_getPoSEconomics",
    "params": []
  }'

{
    "jsonrpc": "2.0",
    "result": {
        "distributablePosInterest": "0x6fd7fd91140603a45caff2",
        "lastDistributeBlock": "0x100",
        "totalPosStakingTokens": "0x29cbb85e5a6e849c00000"
    },
    "id": "15922956697249514502"
}

cfx_getPoSRewardByEpoch

Get rewards information of a PoS epoch by it's correspond PoW epoch number. Only PoW epoch happen's at PoS epoch end will have rewards information. Others will return null.

Added at

Conflux-rust v2.0.0

Parameters

1. QUANTITY: PoW epoch number

params: [
  "0x4a"
]

Returns

• accountRewards: Array of AccountReward
• powEpochHash: HASH - the hash value of the PoW block when the rewards are made

AccountReward

• posAddress: ADDRESS - PoS account address
• powAddress: BASE32 - PoW account address
• reward: QUANTITY - the number of rewards, in the unit of Drip

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_getPoSRewardByEpoch",
    "params": ["0x4a"]
}'

Response

{
    "jsonrpc": "2.0",
    "result": {
        "accountRewards": [
            {
                "posAddress": "0x459b19e745eb410c3696ff1ed15f9de9bb46aa5fefc27b0b6e8b8d7aaadfe8c0",
                "powAddress": "NET8888:TYPE.USER:AAKSNR7XKKFFAM17MNESKAGU076T8FAG3YJ6PTHN16",
                "reward": "0x14931d20aa21eae3e6f"
            },
            {
                "posAddress": "0x046ca462890f25ed9394ca9f92c979ff48e1738a81822ecab96d83813c1a433c",
                "powAddress": "NET8888:TYPE.USER:AAPXUPNXG96GZ4077DAV0151K7P8498N9A6DMAWK1N",
                "reward": "0x2d49549e023888cd390"
            }
        ],
        "powEpochHash": "0x361cb0f19fd13c30da467d20a84ef01aabcd55e9812c5e2fd0721ea11a52e9f1"
    },
    "id": 1
}

cfx_getParamsFromVote

Returns DAO vote params info

Added at

Conflux-rust v2.1.0

Parameters

1. QUANTITY: (optional, default: "latest_state") integer epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter

params: [
  "0x4a"
]

Returns

• powBaseReward: QUANTITY - The PoW base reward amount
• interestRate: QUANTITY - The PoS interest rate
• storagePointProp: QUANTITY - The integer parameter determining the proportion of sponsored storage which will transfer to storage point. The proportion is calculated as storagePointProp / (storagePointProp + 10**18).
• baseFeeShareProp: QUANTITY - The integer parameter determining the proportion of transaction base fee which will reward to miner. Added in Conflux-Rust v2.4.0. The proportion is calculated as baseFeeShareProp / (baseFeeShareProp + 10**18).

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_getParamsFromVote",
    "params": []
}'

Response

{
    "jsonrpc": "2.0",
    "result": {
        "powBaseReward": "0xdeeb372cab9eb32",
        "interestRate": "0x9f69",
        "storagePointProp": "0xde0b6b3a7640000",
        "baseFeeShareProp": "0xde0b6b3a7640000"
    },
    "id": 1
}

cfx_newFilter

This function creates a log filter for tracking usage. It returns a log filter ID, which can be employed through the cfx_getFilterChanges command to retrieve logs newly generated from recently executed transactions. The from* field in this context will be disregarded by this RPC (Remote Procedure Call). This function can also be used via cfx_getFilterLogs to retrieve all logs that match the filter criteria. In this instance, the from* fields are considered.

It is important to note that the filter object will expire after a certain period of inactivity from the last request, typically 60 seconds. This expiration duration is configured by the node. To avoid losing log tracking, it is recommended to refresh or recreate the filter as necessary.

Parameters

1. Object - A log filter object:
   • fromEpoch: QUANTITY|TAG - (optional, default: "latest_checkpoint") the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter. The start epoch to search. Noting that [cfx_getFilterChanges] will ignore this parameter.
   • toEpoch: QUANTITY|TAG - (optional, default: "latest_state") the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter. Search will be applied up until (and including) this epoch number.
   • fromBlock: QUANTITY - (optional, default: null). The start block to search. Noting that [cfx_getFilterChanges] will ignore this parameter.
   • toBlock: QUANTITY - (optional, default: null). Search will be applied untial (and including) this specified block.
   • blockHashes: Array of DATA - (optional, default: null) Array of up to 128 block hashes that the search will be applied to. This will override from/to epoch fields if it's not null.
   • address: Array of BASE32 - (optional, default: null) Search contract addresses. If null, match all. If specified, the log must be produced by one of these contracts.
   • topics: Array - (optional, default: null) 32-byte earch topics. Logs can have 4 topics: the event signature and up to 3 indexed event arguments. The elements of topics match the corresponding log topics. Example: ["0xA", null, ["0xB", "0xC"], null] matches logs with "0xA" as the 1st topic AND ("0xB" OR "0xC") as the 3rd topic. If null, match all.

params: [
    {
        "fromEpoch": "0x873e12",
        "toEpoch": "0x87431b",
        "address": "cfx:type.contract:acc7uawf5ubtnmezvhu9dhc6sghea0403y2dgpyfjp",
        "topics": [["0x233e08777131763a85257b15eafc9f96ef08f259653d9944301ff924b3917cf5", "0xd7fb65c06987247ab480a21659e16bdf0b5862a19869ec264075d50ab3525435"], null, "0x0000000000000000000000001d618f9b63eca8faf90faa9cb799bf4bfe616c26"],
    }
]

Returns

QUANTITY - the id of the log filter object.

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_newFilter",
    "params": ["fromEpoch": "0x873e12"]
}'

Response

{
    "jsonrpc": "2.0",
    "result": "0x09294f7b3b63b52d3771fcafb7b7ed61",
    "id": 1
}

cfx_newBlockFilter

Create a block filter for following up usage. Returns the block filter id which can be used via cfx_getFilterChanges to retrieve latest executed blocks.

It is important to note that the filter object will expire after a certain period of inactivity from the last request, typically 60 seconds. This expiration duration is configured by the node. To avoid losing log tracking, it is recommended to refresh or recreate the filter as necessary.

Parameters

None.

Returns

QUANTITY - the id of the block filter object.

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_newBlockFilter",
    "params": []
}'

Response

{
    "jsonrpc": "2.0",
    "result": "0x09294f7b3b63b52d3771fcafb7b7ed61",
    "id": 1
}

cfx_newPendingTransactionFilter

Create a pending transaction filter for following up usage. Returns the transaction filter id which can be used via cfx_getFilterChanges to retrieve ready but not executed transactions.

note

The created filter will only filter out ready transactions, which means a pending transaction with a future nonce will never be listed via corresponding cfx_getFilterChanges.

Besides, it is important to note that the filter object will expire after a certain period of inactivity from the last request, typically 60 seconds. This expiration duration is configured by the node. To avoid losing log tracking, it is recommended to refresh or recreate the filter as necessary.

Parameters

None.

Returns

QUANTITY - the id of the pending transaction filter object.

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_newPendingTransactionFilter",
    "params": []
}'

Response

{
    "jsonrpc": "2.0",
    "result": "0x09294f7b3b63b52d3771fcafb7b7ed61",
    "id": 1
}

cfx_getFilterChanges

Get filter changes since last retrieve. Return value depends on which type of filter id is provided. Filter id can be returned from current RPCs:

• cfx_newFilter: new logs generated from newly executed transactions matching the filter. Noting that from* fields will be ignored by this RPC.
• cfx_newBlockFilter: new executed blocks.
• cfx_newPendingTransactionFilter: new pending transactions which are ready to execute.

note

The created filter will only filter out ready transactions, which means a pending transaction with a future nonce will never be listed via corresponding cfx_getFilterChanges.

Parameters

1. QUANTITY - the filter id.

params: [
  "0x09294f7b3b63b52d3771fcafb7b7ed61"
]

Returns

Array - array of log receipts (same format as cfx_getLogs return value), block hashes, or transaction hashes depending on the input.

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_getFilterChanges",
    "params": [0x09294f7b3b63b52d3771fcafb7b7ed61]
}'

Response

{
    "jsonrpc": "2.0",
    "result": ["0xcc103077ede14825a5667bddad79482d7bbf1f1a658fed6894fa0e9287fc6be1"],
    "id": 1
}

cfx_getFilterLogs

Returns all logs matching the log filter (Unlike cfx_getFilterChanges, from* fields still work).

Parameters

1. QUANTITY - the filter id.

params: [
  "0x09294f7b3b63b52d3771fcafb7b7ed61"
]

Returns

Array - array of log receipts (same as cfx_getLogs).

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_getFilterLogs",
    "params": [0x09294f7b3b63b52d3771fcafb7b7ed61]
}'

Response

Refer to cfx_getLogs.

cfx_uninstallFilter

Uninstall the specified filter. Returns a bool whether the uninstallation succeeds.

Parameters

1. QUANTITY - the filter id.

params: [
  "0x09294f7b3b63b52d3771fcafb7b7ed61"
]

Returns

Boolean - whether the uninstallation succeeds.

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_uninstallFilter",
    "params": [0x09294f7b3b63b52d3771fcafb7b7ed61]
}'

Response

{
    "jsonrpc" : "2.0",
    "result" : true,
    "id" : 1
}

cfx_getEpochReceipts

Returns all transaction receipts within the specific epoch.

note

Public RPC endpoints are run on top of Confura, where this method is supported if api key is provided. For normal nodes, this method is also supported, but can only be accessed in local environment.

Parameters

1. QUANTITY|TAG|BLOCKHASH_PARAMETER - the epoch number, or the string "latest_state", "latest_confirmed", "latest_checkpoint" or "earliest", see the epoch number parameter, or the EIP-1898 blockHash parameter.
2. Boolean - whether eSpace transaction receipts will be included in the return value, defaults to false.

params: [
    "0x1000",
    true
]

Returns

null if the epoch is not executed, otherwise Array - a two-dimensional array of transaction receipts. Each sub-array represents transactions within a block. Noting an extra field of space will be added to each transaction receipt if the second parameter is set to true. The value of space will be either native meaning this is a core space transaction receipt or evm meaning the transaction is from eSpace.

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_getEpochReceipts",
    "params": ["0x1000", true]
}'

Response

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": [
    [],
    [
      {
        "transactionHash": "0x386442f263e3d4b382f97efe577e3bb5956872a322936b8581133be4ec392153",
        "index": "0x0",
        "blockHash": "0x6ebb905fbfcc80506080e639b80d7bc696dab2f6168e01daedf3c15597987da2",
        "epochNumber": "0x7e6f164",
        "from": "cfxtest:aakvz2e5nt82c9nvbbg84hzbrjy53nsdf20ng5wuj1",
        "to": "cfxtest:acbpnfz9mu42a6ubhdcyadj04m2w8wt6sex7atgyg6",
        "gasUsed": "0x15a1b",
        "accumulatedGasUsed": "0x15a1b",
        "gasFee": "0x50957e574e00",
        "contractCreated": null,
        "logs": [],
        "logsBloom": "0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
        "stateRoot": "0x6ef7bcc4d8cb7c777a587a22002930c5d44e62e1047043c44dd44f89d16e462d",
        "outcomeStatus": "0x0",
        "txExecErrorMsg": null,
        "gasCoveredBySponsor": false,
        "storageCoveredBySponsor": false,
        "storageCollateralized": "0x0",
        "storageReleased": [],
        "space": "native"
      }
    ]
  ]
}

cfx_getCollateralInfo

Returns current chain collateral status info.

Parameters

1. QUANTITY|TAG - (optional, default: "latest_state") the epoch number, or the string ``"latest_state", "latest_confirmed", "latest_checkpoint"or"earliest"`, see the epoch number parameter.

params: [
    "latest_state",
]

Returns

Object - The storage collateral info object of the chain.

• totalStorageTokens
• convertedStoragePoints - converted storage points of the total chain
• usedStoragePoints - storage points already used for sponsorship

Example

Request

curl --location --request POST 'http://localhost:12537' \
--header 'Content-Type: application/json' \
--data-raw '{
    "id": 1,
    "jsonrpc": "2.0",
    "method": "cfx_getCollateralInfo",
    "params": ["latest_executed"]
}'

Response

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": {
    "totalStorageTokens": "0x12c6e8ec75a2740998000",
    "convertedStoragePoints": "0x485ec66",
    "usedStoragePoints": "0x290bc0"
  }
}

cfx_getFeeBurnt

Returns the total burnt tx gas fee by 1559. Added in Conflux-Rust v2.4.0.

Parameters

None.

Returns

QUANTITY - the total burnt tx gas fee by 1559 in Drip.

Example

// Request
curl -X POST --data '{"jsonrpc":"2.0","method":"cfx_getFeeBurnt","id":1}' -H "Content-Type: application/json" localhost:12539

// Result
{
    "jsonrpc" : "2.0",
    "result" : "0x09184e72a000",
    "id" : 1
}

Related Topics

• JSON-RPC specification
• Nodes and clients
• JavaScript APIs
• Backend APIs